Cookies

Notice: This website may or may not use or set cookies used by Google Ad-sense or other third party companies. If you do not wish to have cookies downloaded to your computer, please disable cookie use in your browser. Thank You.
Showing posts with label twitchup snare. Show all posts
Showing posts with label twitchup snare. Show all posts

Sunday, September 20, 2015

Bait Stick Twitchup Snare







Materials needed to build this trap:

1 straight stick 1 foot long and 1/2 inch diameter.
1 "V" shaped stick with legs that are 10-12 inches long and 3/4 inch in diameter.
1 bait stick that has a side branch coming out that is at least 4-5 inches long.
Cordage
A young sapling to use as the engine.
Bait

Locate a known small game path and assemble the trap in the path as shown in the above diagram.

The baited trigger stick length will be determined on how deep you have to pound the v-stick into the ground. The trigger stick should be at 90 degrees to the long straight stick.

When setting the trigger stick onto the straight stick, leave barely enough edge so that the slightest touch will cause the trigger to release. Also, ensure that the loop of the noose is surrounding the baited trigger and larger enough for the game to enter and get caught.

Set up several of these traps at different game path locations in order to give you a better chance at catching something.

Stay Prepared!  Stay Alive!

Charlie

Tuesday, August 18, 2015

Forked Twitch Up Snare





Forked Twitch-up Snare


This version of the Twitch Up Snare I call the Forked Twitch Up Snare. It may be called something else, but not sure. 

This is a good snare to use when you have good game trails and plenty of young saplings. If saplings are not available, but only stout tree limbs, you can use a large rock or log as the engine. Just tie the heavy object to the end of the cordage where the sapling would normally be and then throw the other end of a tree limb and set your snare.

For the game animal you are attempting to snare, make sure your forked stake is strong enough to withstand the pull of the sapling (engine). The two legs should be able to be pounded into the ground without breaking and deep enough not to be pulled out of the ground by the engine.

If you plan on using this design, make it larger in size to account for the size of the animal.

The noose end of the snare can be placed under the bait stick, as shown in the above photo, or can be draped over the bait stick so that when the prey sticks its head up to the bait and removes it, its head gets caught in the noose.

You can use chunks of cactus, prickly pear fruit, peanut butter, fresh vegetables, berries or other similar appetizers as bait for this trap. If at all possible, and if available, use gloves when setting this trap. Animals have a keen sense of smell and if they smell human scent, they may not attempt to take the bait.

After setting the trap, wait about 5 minutes to make sure the forked stake does not pull out of the ground, if it does, make a longer stake and reset it.

Setting 6 or more of these traps is your best chance of catching something. Make sure you place foliage or stones on the sides of the trails to funnel the prey into the snare.

Always check your traps daily for prey. It is a waste of food and inhumane to leave an animal in a trap, especially if it is still alive and suffering. 

When you leave the area, release all your traps. If you are still in a survival situation, take your snares with you to use a your new location.

Stay Prepared! Stay Alive!

Charlie