Survival Weapons- Review of the Pocket Hunter

Product review of Dave Canterbury's Pocket Hunter. 

I gave the Pocket Hunter a 7 out of 10. The Pocket Hunter was reasonably priced. The blister package should be designed so that the fletching on the arrow does not get damaged. 

When  first taken out of the package, I found the Pocket Hunter to be securely built, but after putting a few arrows through it, the arrow rest adapter began to loosen a little making a rattling noise. The thumb screw could not be turned enough by hand to take the looseness out. 

I found it to be a little bit clumbsy when attempting to put the nock of the arrow onto the para-cord string for shooting. After putting a few arrows down range I was able to load the arrows a little faster. 

Once the arrow was loaded, I was able to put the arrows close to center target at 10 and 15 yards, but found it was harder to do at 20 yards and beyond without practice. 

Using the same arrows that came with the Pocket Hunter is important. I found that the arrow that came with the unit shot consistently every time. So use the same arrows or something similar. The Pocket Hunter also comes with a separate 3 pack of arrows at an additional cost. 

Other arrows I used performed much differently. Occasionally, I found the arrows to float around the arrow rest making the shot unpredictable. This was probably due to the arrow nock being too tight on the para-cord string. 

The para-cord release set up caused my finger to get sore, so using a shooting glove of some type will prevent that from happening. 

The arrow adapter and para-cord string can be removed converting the Pocket Hunter into a sling shot. Very versatile in the event you loose all your arrows. 

Over all I was satisfied with the purchase and will continue to practice with it so that I can become proficient enough to use it when the need arises.

If you want to make take down arrows for use with the Pocket Hunter, check out my link here to see how to make your own. This would make a small package together to put in a bug-out bag or survival backpack.

It is important to always practice with your weapon systems that you intend to use so that you can stay proficient with them.

Stay Prepared! Stay Alive!

Charlie

Primitive Weapon- Survival Bow and Arrow

When early man first picked up a stone and learned to use it as a tool and weapon, he probably did not realize how that simple action would morph into the tools and weapons we have today.

I was curious to learn what early man went through by making functional survival tools and weapons from just rocks and sticks. So, I set out into the wilderness to make a primitive bow and arrow using only rocks as my cutting tool.

As I set out to an area that I wanted to make this video, about a 7 mile round trip hike into some rugged country, I collected items from nature that would assist in completing my project.

I was able to locate bones for arrowheads, green saplings for the bow stave, turkey feathers for the arrows, pine rosin and wood coal to make pine glue, yucca stick to make arrow shafts, rocks to fracture for cutting and sanding, and a nice survival site with trees and running water.

I was hoping to locate spruce trees or agave plants to use to make the bow string, but none could be found within the area, but are located in the region I was in (Chihuahuan desert). So, for the bow string I used my boot laces, which were made of para-chord. I also used a pocket survival tool that I wanted to test, which I used to start the fire with to make the pine glue.

It was a lot of hard work scraping, cutting, shaping, sanding and pounding to make a bow and arrow, but I was able to do it in about 6 1/2 hours. I sure have a lot of respect for early mans capabilities. They sure had it hard to survive off the land, but they did it and so can you and I.

Stay Prepared! Stay Alive!
Charlie

Desert Survival Crossbow

The video, photos and diagrams should assist you in building your own survival crossbow.

Stay Prepared! Stay Alive!

Charlie

Survival Blow Gun

A simple survival blow gun can be made from an aluminum hollow type hunting arrow. The arrow size used in the video was a 2117. Both ends were cut off using a tube cutter (not shown).

Different type of reed plants can be hollowed out and used to make a blow gun. Darts can be carved from hard wood or the thorns of some plants can be used to make darts.

Materials:

Hollow aluminum arrow (both ends cut and smoothed)
One foot length of round spring steel stock (the small stuff used by locksmiths)
Electrical tape or similar
Wire cutters
Knife
Plastic type foam
Plastic beads (fake jewelry type that will fit almost the complete inner diameter of the arrow)
A heat source (lighter, stove, etc)
Pliers (multi-tool works great for replacing the wire cutter and knife all in one)

Directions:

The hollow tube should be a straight as possible. Any kinks in the shaft will affect the performance. Using cutting pliers or multi-tool, cut the spring steel rod into 3 equal lengths. These will be used to make the darts. Separate the beads from the string. Heat the end of one rod until it is red. Insert the end of the rod into the plastic bead where the string comes through until it is about half way through. Make sure the bead is not off center. Continue to do this step until you have made the number of darts that you want.

Take a 3 x 3 x 1 piece of plastic foam and shape it into a circle. This will be used to hold the darts (see photo). Find the center of the foam circle and insert the hollow shaft into the center of it. Use a small knife blade to cut a small slit in the center. This will allow the arrow to be inserted easier.

Take a smaller piece of the foam and cut it into the shape of a cone about 1/2 inch in diameter. Cut a small slit in the center and position it on the end of the hollow arrow. This will be used as a mouth piece. Wrap electrical tape around the foam and arrow to hold it in place (see photo).

Make a target out of a cardboard box and practice.

Stay Prepared! Stay Alive!

Charlie